提高白度的杉木CTMP过氧化氢漂前预处理  

PRETREATMENT OF CHINESE FIR CTMP BLEACHING TO OBTAIN HIGH BRIGHTNESS

作　　者：沈葵忠[1] 房桂干[1] 储富祥[2] 林友锋[1] 庞宇[1] 

机构地区：[1]中国林业科学研究院林产化学工业研究所,江苏南京210042 [2]中国林业科学研究院,北京100091

出　　处：《陕西科技大学学报（自然科学版）》2008年第3期45-48,共4页Journal of Shaanxi University of Science & Technology

基　　金：国家"十一五"科技支撑计划专题(2006BAD18B0502)

摘　　要：使用氧化型漂白剂在过氧化氢漂白前进行预处理,以改善后续漂白及提高漂白效率.实验表明,在几种预处理方式中,酸性条件下的H2O2和ClO2的预处理效果较好,漂白得率损失小;6%的H2O2单段过氧化氢漂白可以将杉木CTMP漂白至76.2%ISO的白度,经0.5%ClO2的活化预处理,则可以将白度提高到77.7%ISO.Pretreatment with small amounts of several oxidants, such as chlorine dioxide, hydrogen peroxide in acid medium, can improve bleaching efficiency in the hydrogen peroxide bleaching stage, and allow a higher brightness and suffer a small yield lose. China fir CTMP pulp can be bleached to 76. 2%ISO by a single-stage peroxide bleaching with the bleaching chemicals, 6% H2O2, 4. 5% NaOH, 2% Na2SiO3 and 0.1% DTPA, and be bleached to a higher brightness of 77.7%ISO after pretreated with 0. 5% ClO2.

关 键 词：杉木 机械浆 过氧化氢漂白 二氧化氯 

分 类 号：TS745[轻工技术与工程—制浆造纸工程]