检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:陈锡辉[1] 谢小希[1] 李小男[1] 高翠山[1] 张银鸿[1] 聂振东[1] 闵建[1] 谢一冈[1] 刘建北[1]
出 处:《核电子学与探测技术》2008年第2期254-257,共4页Nuclear Electronics & Detection Technology
摘 要:BESⅢ漂移室宇宙线实验中需要对漂移室的气体比份、高压、电子学电压电流、风扇转速、温湿度等多种参量进行精确复杂的控制或长期监测,从而实现对探测器的建造质量进行全面测试,并将其各项指标调整到最佳状态。这要求我们在没有现成软件可用的情况下短期内从无到有开发出一套功能复杂灵活、点数庞大、稳定可靠、界面友好完善的大型探测器慢控制系统供物理学家们对探测器进行各种复杂的参数控制与监测。本文介绍了基于LabVIEW开发的BESⅢ漂移室宇宙线实验慢控制系统的设计方案及其具体实现方法。In the Beijing Spectrometer (BESⅢ) drift chamber cosmic rays test, there are hundreds of parameters need to be adjusted or set, which involves several hardware devices. The main task of slow control system is to monitor and control tese parameters accurately, such as the gas rate, high voltage, voltage and current of electronics, fan speed, temperature and humidity and so on. The goal of the system is to test the construction quality of the detector and acquire a set of best parameters for it. Based on no ready-made software, we must develop a Slow Control System with the features of high flexibility and ease of use in limited time. This paper gives an introduction to the design and implementation of the LabVIEW based slow control system for the BESⅢ drift chamber cosmic rays test.
分 类 号:TP277[自动化与计算机技术—检测技术与自动化装置]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.200