有限元法与田口方法相结合模拟研究交联聚乙烯电缆绝缘中的水树现象  

Research on Simulation of Water Treeing in XLPE Cable Insulation Using Combination of FEM and Taguchi Method

作　　者：金天雄[1,2] 金石男 江平开[1] 金惠日[2] 玄胜日 

机构地区：[1]上海市电气绝缘与热老化重点实验室,上海交通大学,上海200240 [2]朝鲜金策工业综合大学电气工程系,朝鲜平壤 [3]朝鲜326电线电缆厂,朝鲜平壤

出　　处：《绝缘材料》2008年第3期45-48,共4页Insulating Materials

基　　金：国家自然科学基金项目资助(50677037)

摘　　要：聚合物中水树的引发与生长不仅与多个内部、外部参数有直接的关系,还与这些参数之间的协同作用有关。在研究水树生长的过程中,采用统计方法是非常必要的,这些统计方法首先要包括可靠的重要变量,还要能够对大量的试验结果进行合理的解释。运用田口方法和有限元法相结合的模拟方法可以在短时间内找到诱发水树的原因,还可以表征水树的危险性并采取适当的方法加以抑制其生长。数值分析及水树培养试验结果显示,水树内部的介电常数及介电常数分布是影响水树诱发的主要原因,而水树本身的几何尺寸的作用则相对次要。Many of external, internal parameters and the synergistic effects between them are known to influence the initiation and growth of water tree. Therefore, there is a need not only for a statistical method that would select the most significant variables, but also for a useful statistical approach that would allow a reliable and significant interpretation of the enormous amounts of experimental data. The application of the combination of Taguchi method and FEM to the water tree research allows us to grasp the causes of the water treeing phenomena in a short time, to characterize the danger of water trees and to open up routes to prevent them. The numerical analysis and the treeing test results show that the dielectric permittivity and its distribution inside the water tree are more significant than the geometrical parameters of the water tree in the stage of the tree initiation.

关 键 词：交联聚乙烯电缆绝缘 水树枝 电场分布 有限元法 田口方法 

分 类 号：TM206[一般工业技术—材料科学与工程] TM247.4[电气工程—电工理论与新技术]