基于侧边抛磨与覆盖材料的光纤光栅温度补偿新方法  

Temperature Compensation of Fiber Bragg Grating Based on Side Polishing and Overlay

作　　者：陈哲[1] 刘林和[1] 

机构地区：[1]重大工程灾害与控制教育部重点实验室

出　　处：《中国激光》2008年第6期889-892,共4页Chinese Journal of Lasers

基　　金：国家自然科学基金(10776009);广东省科技攻关重大专项(2004A10602001);广州市科技计划(2007Z2-D0091)资助项目

摘　　要：提出并演示验证了将负热光系数的聚合物材料覆盖在侧边抛磨光纤光栅的抛磨区实现光纤光栅温度补偿的新方法。实验结果表明,这种新方法的温度补偿效果良好,封装后的光纤光栅处在63～79℃的环境温度时,可使其温度敏感度降低为未补偿时的1/16;当处在58～101℃的环境温度时,其温度敏感度降低为未补偿时的1/4。温度补偿封装后的光纤光栅器件直径只有2mm,长度为20mm。A new temperature compensation method of fiber Bragg grating was put forward and experimentally demonstrated based on side polished fiber Bragg grating overlaid with polymer with negative thermo-optic coefficient. Experimental results show that the new method provides a good temperature compensation for fiber Bragg grating. Temperature sensitivity of the fiber Bragg grating packaged by polymer with negative thermo-optic coefficient is reduced to 1/16 of that of fiber Bragg grating without compensation in the range of 63 ℃ to 79 ℃ - and to 1/4 in the range of 58 ℃ to 101 ℃. The new device of fiber Bragg grating packaged for the temperature compensation has a diameter of 2mm and length of 20 mm.

关 键 词：光纤光栅 侧边抛磨光纤 温度补偿 热光材料 覆盖材料 

分 类 号：TN253[电子电信—物理电子学]