夹杂物/析出相尺寸对晶内铁素体形核的影响  

EFFECT OF THE INCLUSION/PRECIPITATE SIZE ON THE INTRAGRANULAR FERRITE NUCLEATION

作　　者：王巍[1] 付立铭[1] 

机构地区：[1]宝山钢铁股份有限公司研究院冶金工艺研究所,上海201900

出　　处：《金属学报》2008年第6期723-728,共6页Acta Metallurgica Sinica

摘　　要：建立了铁索体在夹杂物/析出相上形核的物理模型,从相变形核热力学和动力学机理出发,研究了品内铁素体在夹杂物/析出相上的形核过程,分析了夹杂物/析出相的尺寸、界面性质等因素对晶内铁素体相变形核的影响,结果表明,与铁素体具有较小接触角的夹杂物/析出相更有利于晶内铁素体形核,当夹杂物与基体的界面性质一定时,铁素体在夹杂物上形核的难易程度主要取决于夹杂物的尺寸(夹杂物的曲率半径),尺寸过小不利于铁素体形核,尺寸过大对形核贡献较小,对任意类型的夹杂物/析出相,给出了其计算最优尺寸的方法,计算结果与实际吻合良好。On the basis of the classical nucleation theory a physical model was established to evaluate the nucleating effectiveness of intragranular nucleating on inclusions/precipitates. The influences of inclusion size, interfacial energy and contact angle on the ferrite nucleation rate were studied. Theoretical analysis indicated that the inclusions exhibiting lower contact angle with ferrite are most effective in promoting the nucleation of intragranular ferrite. Given the inclusion-matrix interfacial properties, the ferrite nucleation depends on the inclusion size. For arbitrary type of inclusion/precipitate, there exists an optimum size range in theory with maximum ferrite nucleation rate. The method for calculating this optimum size was given, and the results showed a good agreement with experimental observations.

关 键 词：晶内铁素体 夹杂物/析出相尺寸 形核率 

分 类 号：TG142.1[一般工业技术—材料科学与工程]