1780mm热连轧粗轧宽展模型参数优化研究  

Study on Parameters Optimization of Rough Rolling Spread Model for 1780 Hot Strip

作　　者：黄贞益[1] 朱涛[1] 张国民[2] 

机构地区：[1]安徽工业大学材料科学与工程学院,安徽马鞍山243002 [2]上海宝钢研究院冶金工艺所,上海201900

出　　处：《中国冶金》2008年第5期24-26,共3页China Metallurgy

基　　金：安徽省教育厅自然科学基金重点项目(2006KJ080A)

摘　　要：1780 mm热连轧生产线的粗轧宽展模型分析与其实际应用效果存在较大误差。为提高宽度控制预报精度,采用了优化宽展模型参数法来提高模型精度;运用麦夸尔特法(Levenberg-Marguardt)和优化程序回归出模型的参数。用优化后的参数替换原有模型参数来控制宽度。经检验,宽度预测精度与优化前相比有显著提高。By comparison the spread model on roughing mill of 1 780 mm hot continuous rolling production line and the actual application results, big errors were discovered, To improve the width precision of control, the method of optimizing spread model parameters was used. Model parameters were regressed by optimization process based on Levenberg-Marguardt method, It was found that the width precision of prediction had greatly improved after tests if the width was controlled by new parameters instead of the original.

关 键 词：热轧宽展模型 参数优化 麦夸尔特法 

分 类 号：TG335.11[金属学及工艺—金属压力加工]