阳离子型苯乙烯-丙烯酸酯共聚物的表面施胶性能  

Surface Sizing Performance of Cationic Styrene-butyl Acrylate Copolymers

作　　者：吴宗华[1] 赖晓玲[1] 陈少平[1] 王碧珍[1] 

机构地区：[1]福建师范大学化学与材料学院,福建福州350007

出　　处：《造纸化学品》2008年第3期4-6,9,共4页Paper Chemicals

基　　金：福建省自然科学基金资助项目(E0510013)

摘　　要：用Cobb值测定仪考察了苯乙烯(ST)丙-烯酸丁酯(BA)二-甲基二烯丙基氯化铵(DA)共聚物乳液(简称苯丙乳液)的表面施胶性能。实验结果表明,当DA占单体总质量的7%、m(ST)∶m(BA)=5∶3时,苯丙乳液的表面施胶性能较佳,纸页Cobb值为28.3 g/m2,环压指数提高20%;苯丙乳液与w(交联剂)≤1%共混后进行表面施胶,纸页Cobb值达18.1 g/m2。The surface sizing performance of styrene-butyl acrylate-dimethyldiallylammonium chloride copolymer emulsions was investigated using a Cobb tester. The results show that the emulsions perform well when the cationic monomer constitutes 7% by weight of monomers, and the mass ratio of styrene and butyl acrylate is 5 ： 3. The Cobb value of the surface sized paper is 28.3 g/m^2. The ring crush index increases by 20%. When surface sizing emulsion is used with a linker （1% based on the emulsion） , the Cobb value is as low as 18.1 g/m^2.

关 键 词：苯乙烯-丙烯酸丁酯-二甲基二烯丙基氯化铵共聚物 表面施胶 纸页性能 

分 类 号：TS753.9[轻工技术与工程—制浆造纸工程]