微电解-Fenton法处理含油废乳化液  

TREATMENT OF OILY WASTE EMULSION BY MICROELECTROLYSIS-FENTON PROCESS

作　　者：李春程 

机构地区：[1]秦皇岛第二污水处理厂,河北秦皇岛066004

出　　处：《环境工程》2008年第3期51-53,共3页Environmental Engineering

摘　　要：研究采用铁屑微电解-Fenton法处理机械加工过程中产生的含油废乳化液。探讨pH值、H2O2投加量、铁屑投加量、Fe/C、反应时间等影响因素对处理效果的影响。在优化的操作条件下,COD去除率高达97.61%,可以达到以废治废的目的,且操作简单。Treatment of the oily waste emulsion produced in the machining by microelectrolysis-Fenton process was studied.The influences of pH,the quantity of H2O2,the quantity of iron fragment,the ratio of Fe/C and the reaction time on treatment effects were explored.On the best influent condition,the removal rate of COD was above 97%.

关 键 词：废乳化液 微电解-FENTON COD 去除率 

分 类 号：X703[环境科学与工程—环境工程]