基于薄煤层综采工作面支架控制单元的研究  

Study on powered support control unit in thin coal seam fully mechanized working face

作　　者：王文星[1] 张旭[1] 杜春玲[1] 孟国营[1] 

机构地区：[1]中国矿业大学(北京)机电与信息工程学院,北京100083

出　　处：《中国矿业》2008年第6期49-50,57,共3页China Mining Magazine

摘　　要：薄煤层环境条件复杂,采用先进的检测监控技术有利于提高生产率,降低生产隐患。然而目前国内大多采用引进技术,从而造成严重的系统不配套问题。本文阐述了有关建立从薄煤层综采工作面到地面的检测监控系统的构成、支架控制单元的设计及开发,为薄煤层综采工作面从机械化到智能化的飞跃打下坚实的基础。Geology circumstance of thin coal seam is extremely complicated. The system of production in thin coal seam fully mechanized working face was selected independently. It is important to provide the complete sets of equipment for the thin coal seam fully mechanized working face. System structure and hardware design were pointed out in this paper based on fully mechanized mining face in thin coal seam for complete sets of equipment. Some of them have completed in laboratory. If this technology can be used in working face, production will be promoted to a new step forward.

关 键 词：薄煤层 支架控制单元 液压支架 

分 类 号：TD355[矿业工程—矿井建设]