6061合金特种筒件旋压工艺及组织性能研究  

Studies on microstructures and mechanical properties of 6061 alloy special tube by spinning forming

作　　者：毛柏平[1] 王振生[1] 沈健[1] 

机构地区：[1]北京有色金属研究总院加工工程研究中心,北京100088

出　　处：《轻合金加工技术》2008年第6期38-41,共4页Light Alloy Fabrication Technology

摘　　要：在2m立式旋压机上,采用正、反旋相结合的成形工艺,制备了6061铝合金特种筒形件;分析了其变形前、后组织与性能的变化。试验结果表明,旋压成形获得了所需尺寸规格的特种筒形件,旋压变形后其显微组织细小均匀,综合力学性能得到提高。Research results from spinning forming 6061 aluminium alloy tube with inner flange and outer flange in this paper. It can be show from the results that the tube of 3 m long can be spun by vertical powerful spinning press machine tool that length of travel for spinning roller is only 1.7 m. Microstructures changes help to improve mechanical properties of the tube by spinning forming.

关 键 词：6061铝合金 旋压 组织 

分 类 号：TG306[金属学及工艺—金属压力加工]