铁素体──马氏体双相钢焊接接头的应力腐蚀  

STRESS CORROSION ON WELDED JOINT OF FERRITE-MARTENSITE DUAL-PHASE STEEL

作　　者：余荷英[1] 戴一一[1] 赵子伟[1] 

机构地区：[1]上海大学

出　　处：《钢铁》1997年第9期41-44,20,共5页Iron and Steel

摘　　要：在慢应变速率条件下，研究了Ｆｅ－Ｓｉ－Ｃ系铁素体－马氏体双相钢焊接接头在人造海水中的应力腐蚀开裂（ＳＣＣ）行为。用单边预裂纹拉伸试样测定了焊接接头各部位的应力强度因子Ｋ１值。结果表明，焊接接头各部位在人造海水中的应力腐蚀开裂敏感性有很大差异，其中热影响区（ＨＡＺ）对ＳＣＣ最敏感，Ｋ１值最低；随着阴极电位朝负方向增加，ＳＣＣ敏感性增大；除氢处理可以改善焊接接头的ＳＣＣ抗力。The stress corrosion cracking (SCC) behaviour of welded joint for Fe-Si-C series ferrite-martensite dual-phase steel in artificial seawater was investigated under the condition of slow strain rate test (SSRT). The stress intensity factors K1 of various position of welded joint were measured by single edge precracked tensile specimen. The results show that SCC susceptibility of various position for welded joint in artificial seawater is different, the HAZ is most susceptible to SCC and k1 value is the lowest. With raising the cathode potential in negative direction, the susceptibility to SCC is increased. The dehydrogenated treatment may improve the SCC resistance of welded joint.

关 键 词：双相钢 焊接接头 应力腐蚀 开裂 铁素体 马氏体 

分 类 号：TG174.3[金属学及工艺—金属表面处理] TG142.23[金属学及工艺—金属学]