检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李宏[1] 徐永东[1] 张立同[1] 成来飞[1] 马军强[1] 张青[1] 李开元[1]
机构地区:[1]西北工业大学高温结构复合材料国防科技重点实验室,西安710072
出 处:《航空材料学报》2007年第4期60-64,共5页Journal of Aeronautical Materials
摘 要:分别采用热膨胀仪和激光脉冲导热仪测试2.5D C/SiC复合材料从室温到1400℃纵向、横向的热膨胀系数和厚度方向的热扩散系数。结果表明,2.5D C/SiC复合材料的热膨胀系数随温度的升高而缓慢升高,在350℃和700℃附近出现波动,且横向的热膨胀系数略高于纵向。热扩散系数随温度的升高逐渐降低,且下降速率随温度的升高而变缓。CVD SiC涂层后,材料热扩散系数提高1~2倍。The coefficients of thermal expansion and thermal diffusivity of the 2.5D carbon/silicon carbide composites tested from room temperature to 1400℃ by the thermal dilatometer and laser flash apparatus. The results showed that the coefficient of thermal expansion increased slowly as temperature increased, with fluctuations at 350℃ and 700℃, and the transverse coefficient was slightly higher than the longitudinal coefficient. However, the coefficient of thermal diffusivity decreased as temperature increased, and the rate of decline turned slower. The coefficient of thermal diffusivity of the composite with SiC coating increased by 1 - 2 times compared to the material without SiC coating.
关 键 词:2.5D C/SIC复合材料 热膨胀系数 热扩散系数 涂层
分 类 号:TB332[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.227