漏斗式二级复合抛物面太阳能聚光器的优化设计  

THE OPTIMIZING DESIGN OF THE TUNDISH TYPE TWO STAGE SOLAR COMPOUND PARABOLOID CONCENTRATOR

作　　者：郑宏飞[1] 李正良[2] 陶涛[1] 韦以明[3] 何开岩[1,3] 

机构地区：[1]北京理工大学机械与车辆工程学院,北京100081 [2]广西师范学院物理与电子科学系,南宁530001 [3]广西大学物理科学与技术学院,南宁530004

出　　处：《太阳能学报》2008年第7期820-826,共7页Acta Energiae Solaris Sinica

基　　金：国家自然科学基金项目(50576004);广西科学基金项目(桂科基0639034)

摘　　要：构造了一种由二级复合抛物面(CPC)叠置组成的漏斗式太阳能聚光器,对其性能进行了讨论。为改善第二级CPC的最大聚光角,重点对其进行了变尺寸设计,理论导出了各参数间的关系,给出了最优参数范围。指出,在合理配置第二级CPC各设计参数的条件下,其最大聚光角可达30°～35°,有效地增加了整体光漏斗的导光率和最大聚光角。在实际天气条件下,对一个实际二级复合抛物面太阳能聚光器进行了实验测试,给出了不同入射角条件下系统的导光性能曲线,对实验结果进行了讨论,指出了改进方向。A new tundish type solar concentrator constructed with napping two compound parabolic concentrators （CPC） was designed and its performances was discussed. In order to improve the maximum concentration angle of the second stage CPC, a changing figuration design was carried out. The relationships between the parameters and their optimum value range were theoretically conducted out. As the results, the maximum concentration angle of the second stage CPC can reach 30° - 35° under the conditions of disposing reasonable design parameters, which contributes to increase the permeance light rate and the maximum concentration angle of the whole tundish. Under the practical weather condition, a real solar light tundish consisted of two stage CPC napped was tested. The performance under different incidence angle conditions was given. The experimental results were discussed and an improving direction was pointed out.

关 键 词：光漏斗 最大集光角 太阳能聚光器 

分 类 号：TK511[动力工程及工程热物理—热能工程]