轴对称零件拉深过程中的最小无皱压边力  

THE MINIMUM WRINKLESS BLANK-HOLDER FORCE FOR AXIAL SYMMETRY WORKPIECE IN DEEP-DRAWING

作　　者：高凯祁[1] 杜颂[1] 胡世光[1] 

机构地区：[1]北京航空航天大学

出　　处：《塑性工程学报》1997年第4期30-37,共8页Journal of Plasticity Engineering

基　　金：航空科学基金

摘　　要：对于轴对称零件的突缘变形区，运用能量法和二维折线式变位函数，计及材料常数ｎ，ｒ值和板厚变化，揭示了拉深中最小无皱压边力的变化规律。指出其最大值明显滞后于突缘变形最大径向拉力的发生时刻，突破了两者基本上同时发生的传统结论。计算结果与实验数据符合良好。Based on a two-dimensional broken-line model of an annular flange and the energy method,the law of minimum wrinkless blankholder force in deep-drawing is discovered,considering the variations in material constants , and thickness.It is pointed out that the maximum value of minimum wrinkless blankholder force,arrives much later than the moment when the maximum tension of the flange in radial direction is reached,which breaks through the conventional conclusion that they take place at about the same time.The calculated results are in good accordance with the experimental data.

关 键 词：压边力 拉深 能量法 轴对称零件 金属 

分 类 号：TG115.52[金属学及工艺—物理冶金]