新技术在衡钢3^#水平连铸机上的应用  

New Technology Application on the 3^# Horizontal Continuous Casting Machine in Henggang

作　　者：田汉蒲 

机构地区：[1]衡阳钢管(集团)有限公司,湖南衡阳421001

出　　处：《金属材料与冶金工程》2008年第2期34-36,64,共4页Metal Materials and Metallurgy Engineering

摘　　要：介绍了衡钢自主设计建设3#水平连铸机所采用的中间包蓄热式烘烤、红外摄像定尺、步进式冷床、喷雾式冷却等新技术。生产实践表明:中间包内形成良好的温度场,2～4 h温度可达到1 100℃以上,保证了涂料层不发生粉化或龟裂脱落;定尺精度可控制在0～+30 mm范围,按0～+50 mm允许偏差检验的铸坯定尺综合合格率达到97%;铸坯弯曲问题得到彻底解决;夏季高温条件下结晶器冷却水进水温度控制在35℃以下,保证了冷却制度的正常执行。The paper introduced a series of new technology （tundish heat accumulating type baking, infrared photography cut lengths, step-type cooling bed, spray type cooling） which were adopted in 3^# horizontal continuous casting machine which were designed by Henggang. Productive practice indicates that fine temperature field is formed in tundish, temperature can exceed 1 100 ℃ only 2- 4 hours, coating material don＇t powder and map cracking, the accuracy of bloom size can be controlled the range of 0～＋30 mm, the qualified rate of bloom size can reach 97% by the standard of 0 ～ ＋ 50 ram, the curved question on bloom can be thoroughly resolved, the temperature of the mould cooling water can be controlled lower 35 ℃, the cooling system can be guaranteed to carry out.

关 键 词：新技术应用 水平连铸机 铸坯质量 

分 类 号：TG249.7[金属学及工艺—铸造]