分流组合模挤压铝合金口琴管的数值模拟  

Numerical simulation in the porthole dies extrusion of aluminum harmonica-shaped tube

作　　者：程磊[1] 谢水生[1] 黄国杰[1] 吴朋越[1] 和优锋[1] 

机构地区：[1]北京有色金属研究总院有色金属材料制备加工国家重点实验室,北京100088

出　　处：《塑性工程学报》2008年第4期131-135,170,共6页Journal of Plasticity Engineering

基　　金：国家自然科学基金资助项目(50674017)

摘　　要：采用刚粘塑性有限元法,在DEFORM-3D有限元商业软件上成功实现了铝合金口琴管分流组合模挤压过程的三维数值模拟,获得了分流组合模挤压过程中材料的流动规律,挤压力、应力场、应变场和温度场的分布,以及模具出口处金属流速的分布情况。通过数值模拟发现,型材出口流速不均匀,造成端面不齐,对此,提出了模具修改方案,通过调节模具工作带的长度,实现了型材挤压出口流速均匀的目的,从而保障了型材的产品质量。模拟结果为模具的优化设计及工艺参数的选取提供了理论参考。According to the rigid-viscoplasticity finite element method,the porthole die extrusion process of an aluminum harmonica-shaped tube was successfully simulated based software Deform-3D.The distribution of stress field,effective strain field,velocity field and temperature field during the extrusion process were discussed and metal flow in welding extrusion was analyzed in details.The simulation results show that the material flow velocities in the bearing exit are non-uniform with the originally designed die and the forepart of the profile is not neat or even.Aiming at solving this problem,the modification method of die structure is improved.The result shows that the uniform material flow velocities in the die exit and a perfect extruded are obtained by modification bearing length.The simulation results provide theoretical reference for mould design and selection of technological parameters.

关 键 词：口琴管 挤压 分流组合模 数值模拟 

分 类 号：TG376[金属学及工艺—金属压力加工]