含醇溴化锂水溶液汽液界面的分子模拟  

Molecular modeling at liquid-vapor interface of lithium bromide aqueous solutions with alcohols surfactants

作　　者：朱蓓蓓[1] 高洪涛[1] 

机构地区：[1]大连海事大学轮机工程学院

出　　处：《大连海事大学学报》2008年第3期29-33,共5页Journal of Dalian Maritime University

基　　金：国家自然科学基金资助项目(50476038);教育部留学回国人员科研启动基金资助项目([2005]383号);大连市留学回国人员科研基金资助项目(2004)

摘　　要：为研究界面活性剂在溴化锂吸收机组中对吸收过程的强化机理,采用分子动力学方法模拟303 K时的水、质量分数为60%的溴化锂水溶液以及分别添加不同量的乙醇、正辛醇(1-octanol)、仲辛醇(2-octanol)、异辛醇(2-ethyl-1hexanol)的水或溴化锂水溶液的汽液界面,并且分别对其密度分布、微观结构进行研究,计算分别添加上述醇类的溴化锂水溶液的汽液界面张力,计算结果与实验值相符.模拟结果显示:正辛醇、仲辛醇、异辛醇分子吸附在汽液界面并在界面处呈优势取向,即疏水烃基指向气相,亲水羟基指向液相;醇分子的亲水基尽可能多地趋向水分子,二者在界面处以氢键相互作用;醇分子的添加量为某一特定范围时,醇分子的烃基链在界面处产生较大摆动.To investigate the strengthening mechanism of certain surfactant additives on the heat and mass transfer process in absorption, molecular dynamics simulations were carried out to study the longitudinal density profile and microstructure of the liquid-vapor interface of pure water, lithium bromide aqueous solutions with the mass fraction of 60%, and water or lithium bromide aqueous solutions with various concentrations of ethand, 1-octanol, 2-octanol and 2-ethy-1-hexanol at 303K, respectively. The surface tension of liquid-vapor interface of lithiurn bromide aqueous solutions with the above alcohols was calcu-lated respectively, and the calculated value conformed with the experimental data. The simulation results show that 1-octanol, 2-octanol or 2-ethy-1-hexanol molecules tend to absorb at the interface, showing their dominant orientation with the hydrophobic hydrocarbyl pointing into the vapor phase and with the hydrophilic hydroxyl pointing into the liquid phase, while the hydroxyl groups form a hydrogen bonding network with water which make the alcohol molecules seek more hydrophilic interactions with water molecules. The hydrocarbon chains can make large swing at the interface when the addition of alcohol molecules is in a certain range.

关 键 词：界面活性剂 汽液界面 分子模拟 界面张力 密度分布 

分 类 号：TB616[一般工业技术—制冷工程]