增强增韧环氧杂化树脂制备与性能研究  

Preparation and performance of reinforcing and toughening epoxy hybrid resin

作　　者：张道洪[1] 蒋世宝[2] 贾德民[2] 

机构地区：[1]中南民族大学催化材料科学湖北省暨国家民委-教育部共建重点实验室,湖北武汉430074 [2]华南理工大学材料科学与工程学院,广东广州510641

出　　处：《粘接》2008年第8期1-5,共5页Adhesion

基　　金：中国博士后科学基金(20070420773);武汉市青年科技晨光计划(200850731406);中南民族大学自然科学基金(YZZ06012)资助

摘　　要：双酚A型环氧树脂的增韧增强研究是热固性树脂的重要发展方向之一，利用一步法合成了脂肪族端羟基超支化聚合物（HTP-2），再利用“嫁接法”制备了液体型超支化环氧树脂HTPE-2，研究了HTPE-2／双酚A型环氧杂化树脂的力学性能和热学性能。利用红外光谱、扫描电镜、热分析和分子模拟技术讨论了超支化环氧树脂的结构、杂化树脂的性能和原位增韧增强机理。结果显示，杂化树脂的力学性能随超支化环氧树脂含量的增加先提高后下降，具有最大值；当HTPE-2的质量分数为9％～12％时，杂化树脂的拉伸强度、弯曲强度、冲击强度和断裂韧性分别提高18．0％、35．7％、192．4％和39．6％，综合性能较好，但玻璃化转变温度（Tg）和热分解温度有所下降。Study of toughening and reinforcing of bisphenol-A epoxy resin （DGEBA） is an important developmen direction in thermosetting resin field. This paper reported the preparation of aliphatic hyperbranched polyester HTP-2 using one-pot method and the preparation of aliphatic hyperbranched epoxy resin HTPE-2 from the reaction of HTP-2 with epichlorohydrin （ECH） by engrafting process. FT-IR ,SEM, DSC ,TGA and molecular simulation technology were used to study the structure of HTPE-2, performance of the HTPE-2/DGEBA hybrid resin and situ toughening and reinforcing mechanism. The study of mechanical performance of HTPE-2/DGEBA hybrid resin showed that the content of HTPE-2 had important effect on the performance of the composite material, and the performance of the hybrid resin has a maximum with the increase of HTPE-2 content. The impact strength and fracture toughness of the hybrid resin with 9% - 12% by weight HTPE-2 are almost 2. 924 and 1. 396 times of DGEBA performance respectively, furthermore,the tensile and flexural strength can also be enhanced respectively by about 18.0% and 35.7%. The glass transition temperature and thermal degradation temperature, however, are found to decrease to some extent.

关 键 词：超支化环氧树脂 制备 增韧增强 机理 分子模拟 

分 类 号：TQ323.5[化学工程—合成树脂塑料工业]