单机架可逆式冷轧机速度制度的研究  

Study on rolling speed of single-stand reversing cold mill

作　　者：王勇勤[1] 肖国凯[1] 严兴春[1] 

机构地区：[1]重庆大学机械工程学院,重庆400030

出　　处：《重型机械》2008年第4期24-26,共3页Heavy Machinery

摘　　要：单机架可逆冷轧机轧制速度的制定大多依据工程技术人员的经验,这种方法在实际中虽然可行,但往往不能达到最优。本文以各道次等功率分配为原则,研究了轧制速度的分配方法,并编制了相应的计算机软件,为单机架可逆式冷轧机快速制定合理的轧制速度、提高带钢产量、降低轧制能耗提供了有力的参考依据。The establishment of the rolling speed of single - stand reversing cold mill is done almost based on the experience of the technician. Although it is feasible in practice, it cannot achieve the optimization. Here, the article shows a new way of studying the allocation of the rolling speed based on the principle of equal power. To make the calculation faster, the relevant computer software is worked out. All of this is helpful to the implement of the rolling speed fast and legitimately, to the improvement of the productivity and to the reduction the rolling power.

关 键 词：单机架 可逆式冷轧机 等功率 速度制度 

分 类 号：TG335.12[金属学及工艺—金属压力加工]