基于MIPv6的有状态地址配置的设计与实现  

Design And Implementation of Stateful Address Autoconfiguration Based on MIPv6

作　　者：李晓林[1] 陈山枝[1] 周华春[1] 秦雅娟[1] 

机构地区：[1]北京交通大学电子信息工程学院,100044

出　　处：《微计算机信息》2008年第24期158-159,3,共3页Control & Automation

基　　金：高等学校科技创新工程重大项目培育资金项目(706005);移动互联网络理论与关键技术项目(60573001)

摘　　要：MIPv6中转交地址的配置直接影响移动IP的切换性能,通常采用无状态地址自动配置,在实际应用中难以有效管理且安全性较差。针对这一问题,本文在RFC3775协议设计的基础上,分析比较了集中式和分布式有状态地址配置(DHCPv6)部署方法优缺点,设计并实现了移动IP有状态地址配置转交地址方案,并给出了实验结果。结果表明有状态地址配置方案能够有效实现对移动节点管理,满足实际应用的需要。In MIPv6, configuration of Care-of Address （CoA） has direct influence on handover performance of mobile IP. Commonly used stateless address autoconfiguration protocol has the disadvantage of ineffective administration and weak security in practical ap- plication. For this problem, we put forward centralized and distributed deployments of stateful address autoconfiguration（DHCPv6）. Af- ter comparing and analyzing the advantage and disadvantage of them, we design and implement stateful address autoconfiguration protocol for gain CoA based on RFC3775.The experimental results show that stateful address autoconfiguration protocol achieves effective management of mobile node and can adapt to practical application.

关 键 词：MIPV6 DHCPV6 转交地址 路由通告 

分 类 号：TP393[自动化与计算机技术—计算机应用技术]