GDX1包装机组热熔胶喷涂系统的开发应用  

Development and Application of Hot Melt Gumming System in GDX1 Packer

作　　者：吕小波 

机构地区：[1]红塔集团玉溪卷烟厂中试车间

出　　处：《烟草科技》2008年第8期29-30,共2页Tobacco Science & Technology

摘　　要：GDX1包装机组在生产软包硬化产品时,商标纸上胶后胶水不能及时固化,导致设备运行效率降低,且废品较多。为此,开发了热熔胶喷涂系统以解决商标纸的粘胶问题。该系统由喷胶装置、供胶系统和控制系统组成,其中,喷胶装置由喷嘴、气动开关、胶分配器等组成;供胶装置由供胶机和胶管组成;控制系统由编码器、传感器、控制器等组成。热熔胶喷涂系统实际应用表明,系统运行稳定,设备运行速度由130包/m in提高到350包/m in以上,提高了设备运行效率,降低了商标纸及铝箔纸的消耗。When GDX1 packer running with light weight card board of （175±5）g/m^2, the glue applied on label solidified slowly which resulted in low machine efficiency and high packet rejection. Therefore, a hot melt gumming system was developed, which was composed of gumming device, adhesive supply system and control system. The gumming device was made up of nozzle, pneumatic switch and adhesive distributor; adhesive supply system included adhesive supply device and attached tubes; and the control system was composed of encoder, sensor and controller. The improved gumming system ran steadily, machine speed increased from 130 packet/min to above 350 packet/min, and the consumption of label and foil decreased accordingly.

关 键 词：GDX1包装机组 商标纸 喷嘴 热熔胶 喷涂系统 

分 类 号：TS434[农业科学—烟草工业]