纳米铝酸锶长余辉发光粉体的制备与性能表征  

Preparation and characterization of nano-scaled long afterglow aluminates phosphors

作　　者：刘晓林[1] 魏家良[1] 陈建峰[1] 邹新阳[1] 

机构地区：[1]北京化工大学纳米材料先进制备技术与应用科学教育部重点实验室,北京100029

出　　处：《功能材料》2008年第7期1074-1077,共4页Journal of Functional Materials

基　　金：国家自然科学基金资助项目(50642042)

摘　　要：采用共沉淀法首先制得铝酸锶前驱体,经水热处理后煅烧获得了颗粒尺寸约为50nm的SrAl2O4∶Eu2+,Dy3+长余辉发光粉体。利用X射线衍射仪、透射电镜、荧光分光光度计和余辉测试仪等手段对粉体进行了表征。结果表明,在相同的煅烧条件下,与直接煅烧前驱体获得的粉体相比,经水热处理的粉体不仅颗粒尺寸小、粒度分布均匀而且发光性能(亮度和余辉)优异。The nano-scaled long afterglow phosphors of SrAl2O4： Eu2＋ ,Dy3＋ with about 50nm were prepared by hydrothermally treating and then calcining precursors, which were obtained by co-precipitation reaction. The phosphors were characterized by powder X-ray diffraction, transmission electron microscopy, fluorescence spec- trophotometer and afterglow test, respectively. The experimental results showed that the average size of particles after hydrothermal treatment is smaller than the powders made by co-precipitation and the powders have more narrow size distribution and better luminescence performances （brightness and afterglow）.

关 键 词：发光 SRAL2O4 共沉淀法 水热处理 纳米 

分 类 号：TQ422[化学工程]