镁合金板料热拉深成形数值模拟中材料模型研究  

Research of material model during numerically simulating the hot deep drawing of magnesium alloy sheet metal

作　　者：张庭芳[1] 黄菊花[1] 杨国泰[1] 扶名福[1] 

机构地区：[1]南昌大学机电工程学院,江西南昌330029

出　　处：《锻压技术》2008年第4期124-128,共5页Forging & Stamping Technology

基　　金：江西省教育厅科研项目(赣教技字2006);江西省科技厅科技支撑项目(2007)

摘　　要：分别利用用户子程序二次开发方法和直接输入应力应变实验数据方法,在ABAQUS软件中获得镁合金材料模型,进行了不同温度下镁板热拉深成形极限数值模拟研究。结果表明:镁合金板料极限拉深高度在一定范围内随温度的提高而增大,本文提出的含非常软化因子的镁合金高温流变应力数学模型能较好地预测流变应力,通过二次子程序开发方法在ABAQUS软件中加入新的材料模型是切实可行的。Method of user subroutine and importing experimental stress-strain datas directly were used to get magnesium material model in ABAQUS respectively, the numerical simulation research of magnesium alloy limit deep drawing height was carried out at different temperatures. It is found that in a certain scope, increasing temperature, the limit deep drawing height is increased, the mathematic model of magnesium alloy flow stress at high temperature which includes a variational intenerate factor bringed forward here could forecast magnesium alloy flow stress preferably. It feasible to join own material model through user subroutine in ABAQUS.

关 键 词：镁合金 数值模拟 极限拉深高度 流变应力模型 用户子程序 

分 类 号：TG386.3[金属学及工艺—金属压力加工]