镁合金托弹板半固态挤压成形  

Manufacturing of Magnesium Alloy Bullet Supporter by Semi-solid Squeezing Casting

作　　者：唐全波[1] 黄世界 何鹏 伍太宾[1] 

机构地区：[1]重庆工商大学机械与包装工程学院 [2]成都铁路机械厂 [3]重庆激光快速原型及模具制造中心

出　　处：《特种铸造及有色合金》2008年第8期611-613,共3页Special Casting & Nonferrous Alloys

基　　金：国家高技术研究发展计划(863计划)资助项目(2002AA305501)

摘　　要：采用应变诱导熔化激活法(SIMA法)制备镁合金半固态坯料,再应用等温挤压成形技术,对复杂形状的镁合金托弹板进行了半固态精密挤压成形试验研究;确定了半固态坯料制备、重熔加热和等温挤压成形等工艺过程中的坯料尺寸、加热温度、加热时间及成形速度等工艺参数,设计制造了等温挤压成形模具。半固态等温挤压成形的镁合金托弹板经固溶和时效热处理后,其抗拉强度σb可达到330MPa,伸长率δ可达到7%,接近锻件性能指标。The complicated magnesium alloy bullet supporter was manufactured by semi-solid extrusion method based on isothermal extrusion technology, in which semi-solid magnesium alloy billet was prepared by SIMA (strain induction melt activation). Billet dimension, heating temperature and heating time as well as extruded rate were determined in process of preparation of billet, re-melting and isothermal extrusion, and the mould for isothermal extrusion forming was designed. The average tensile strength and elongation of semi-solid isothermal-extruded magnesium alloy bullet supporter are 330 MPa and 7%, respectively, after solid solution and aging treatment, which are near to those of forging supporter.

关 键 词：半固态成形 等温成形 触变成形 镁合金 

分 类 号：TG379[金属学及工艺—金属压力加工] TG249.9