高频磁场下两段式无缝结晶器内磁场分布和弯月面的实验研究  

Experimetal Study on Distribution of Magnetic Field and Meniscus Shape in Two-stage Slitless Mold with High Frequency

作　　者：金百刚[1] 王强[1] 高翱[1] 杨景烽[1] 赫冀成[1] 

机构地区：[1]东北大学材料电磁过程研究教育部重点实验室

出　　处：《铸造技术》2008年第8期1005-1009,共5页Foundry Technology

基　　金：辽宁省科技厅科技攻关项目(2006221007);国家高技术研究发展计划项目(2001AA337040);沈阳市人才资源开发专项基金资助

摘　　要：为了验证两段式软接触电磁连铸结晶器的透磁效果,实验测试了两段式结晶器内部的磁感应强度及弯月面高度,并与传统结晶器进行比较。结果表明,结晶器顶部的不锈钢法兰可有效防止过多的磁力线由结晶器顶部直接漏入而影响结晶器的透磁效果;两段式结晶器的透磁效果随结晶器壁厚的减小而增强。高频25 kHz条件下,壁厚为10 mm的两段式结晶器的透磁效果小于纯铜结晶器的透磁效果;壁厚为7 mm的两段式结晶器的透磁效果大于纯铜结晶器的透磁效果;壁厚为5 mm的两段式结晶器的透磁效果是纯铜结晶器的4.5倍;改变结晶器的结构参数和电磁参数,两段式结晶器可以达到良好的透磁效果并形成相应的弯月面。In order to understand the penetration of magnetic field in two-stage slitless mold for soft- contact electromagnetic continuous casting, the magnetic flux density and the height of meniscus in two-stage mold and conventional mold were compared through experimental measurement. The results show that the stainless steel flange can prevent the magnetic lines of flux going into mold from the top of mold, It is beneficial to the measurement of magnetic penetration with a flange on the mold; The magnetic flux density increases with decreasing the thickness of mold when frequency is 25 kHz, The magnetic flux density in two-stage mold is less than that in conventional mold when d= 10 mm, but the magnetic flux density in two-stage mold is more than that in conventional mold when d = 7 mm, and the penetration of magnetic field in two-stage mold is 4,5 times larger than that in conventional mold when d=5 mm; The good penetration of magnetic field and the formation of desired meniscus in two-stage slitless can be obtained by changing the structural and electromagnetic parameters.

关 键 词：软接触电磁连铸 两段式无缝结晶器 透磁效果 电磁场 弯月面 

分 类 号：TF777[冶金工程—钢铁冶金]