PVP-b-PLA修饰Fe_3O_4磁性纳米粒子的制备与表征  

PREPARATION AND CHARACTERIZATION OF PVP-b-PLA MODIFIED Fe_3O_4 MAGNETIC NANOPARTICLES

作　　者：熊雷[1] 姜宏伟[1] 王迪珍[1] 

机构地区：[1]华南理工大学材料学院,广州510641

出　　处：《高分子学报》2008年第8期791-796,共6页Acta Polymerica Sinica

基　　金：国家自然科学基金(基金号20374020)资助项目;华南理工大学学科建设和广东省团队资助项目(项目号39172)

摘　　要：通过硅烷偶联剂与Fe3O4磁性纳米粒子偶合在其表面引入C C端基,进一步与N-乙烯基吡咯烷酮(NVP)加成聚合制备含端羟基PVP包裹的磁体,再引发丙交酯(LA)开环聚合制得PVP-b-PLA修饰的Fe3O4纳米粒子.通过XRD、GPC、FTIR、SEM、TG、DSC和激光粒度仪等,对产物进行分析和表征,结果表明,纳米Fe3O4与PVP以及PVP与PLA之间均为化学键联,PVP和PLA是以嵌段共聚物的形式存在且两者之间存在明显的微相分离,纳米Fe3O4表面聚合物包覆率为35%,厚度约13 nm.此外,该PVP-b-PLA包覆的磁性纳米粒子比饱和磁化强度为53 emu/g,与未包覆相比下降约25%.Fe3O4 magnetic nanoparticles with mean diameter of about 20 nm were first prepared by a precipitation method with ferric chloride as starting material, which was partially reduced to ferrous salts by Na2SO3 before alkalinizing with ammonia. Afterwards, C=C end groups were imported to the surface of Fe3O4 magnetic nanoparticles by silane coupling agent treatment,and then polyvinylpyrrolidone （PVP） with hydroxyl end groups was grafted on the surface by addition polymerization of N-vinylpyrrolidone （NVP） with the C=C bonds. The resultant magnetic initiator was further used to polymerize lactide （LA） to generate the designed PVP-b-PLA modified Fe3O4 magnetic nanoparticles, The characterization of the production was analyzed through XRD, GPC, FTIR, SEM, TG, DSC and laser particle size analyzer. The XRD spectra of PVP-b-PLA modified Fe3O4 magnetic nanoparticles were very similar to those of non-modified nanoparticles, suggesting that the crystal lattice did not change after surface polymerization,which was still the face centered cubic （fcc） structure,There appeared a new wide diffraction peek from 10° to 25°belonging to the surface coatings, which exhibited that the surface polymers were noncrystalline. According to the FTIR analyses, there were chemical bonds between Fe3O4 and PVP and between PVP and PLA. DSC studies indicated that PVP and PLA were linked in the form of block copolymer, and there were apparently micro-phase separations between the two blocks. The results of TG analyses indicated that the coating amount of PVP and PLA was about 15% and 20%, respectively. SEM and laser particle size analyses showed that the composite nanoparticles had a relatively uniform diameter of about 45 nm, and the thickness of the coated copolymer layer was about 13 nm. In addition,the specific saturation magnetization of PVP-b-PLA modified magnetic nanoprarticles was 53 emu/g, which declined by 25 % compared to that of bare Fe3O4 nanoparticles. The graft of PVP-b-PLA on the surface of Fe3 O4 magnetic nanoparti

关 键 词：Fe3O4磁性纳米粒子 聚乙烯吡咯烷酮(PVP) 聚乳酸(PLA) 

分 类 号：TB383.1[一般工业技术—材料科学与工程]