淹没磨料射流场模拟计算分析  

The analyse of numerical simulation of abrasive water jets submerged

作　　者：向文英[1] 卢义玉[2] 李晓红[2] 

机构地区：[1]重庆大学城市建设与环境工程学院,重庆40045 [2]重庆大学资源与环境科学学院,重庆400045

出　　处：《四川大学学报（自然科学版）》2008年第4期929-934,共6页Journal of Sichuan University(Natural Science Edition)

基　　金：国家自然科学基金专项创新研究群体基金(50621403);国家自然科学基金面上项目(506040191)

摘　　要：通过对高压磨料射流的多相流模型的研究,数值模拟了淹没磨料射流流场与压力场.指出颗粒相速度分布始终小于水相速度的分布,颗粒相最大滞止压力普遍较水相增加100%以上.分析了淹没磨料射流流场与压力场随泵压、围压的变化规律.指出随着泵压增加,水相速度与颗粒相速度增加幅度相同;随围压的增加,水相速度与颗粒相速度减少幅度一致.Based on the study of multiphase model in high pressure abrasive water jets, the flow field and pressure field were simulated in abrasive water jets submerged. The calculated results indicate that the velocity distributing of abrasive particle is smaller than that of water, while the stagnant pressure of abrasive particle is one hundred percent more than that of water. It were analysed that the laws of the flow field and pressure field in abrasive water jets submerged change with different pump pressures and ambient pressures. It were shown that the amplitude of velocity of water and abrasive particle are the same increasing with bump pressure while they are the same decreasing with ambient pressure.

关 键 词：淹没磨料射流 数值模拟:速度分布 滞止压力 

分 类 号：TU443[建筑科学—岩土工程]