Mn合金化奥贝球铁螺旋锥齿轮的试制  

Trial Production of Helical-Bevel Gear with Mn-Alloyed ADI

作　　者：王国兴 魏瑛[2] 刘生发[3] 

机构地区：[1]湖北昌虹工贸公司铸造厂,湖北武汉430065 [2]中国船舶重工集团公司武船金属制造分厂,湖北武汉430064 [3]武汉理工大学材料科学与工程学院,湖北武汉430070

出　　处：《现代铸铁》2008年第4期54-57,共4页Modern Cast Iron

摘　　要：研究了Mn合金化奥贝球铁标准试样和齿轮的显微组织与力学性能。结果表明,Mn合金化奥贝球铁标准试样经等温淬火和回火后的力学性能范围为σb=1000.4～1100MPa,δ=5.2%～6.8%,硬度30～33HRC,αk=70～100J/cm-(2无缺口试样),达到了EN1564-97/EN-GJS-1000-5欧洲标准。齿轮啮合后其表面残余奥氏体转变成马氏体组织,显著提高了齿轮的表面硬度。The microstructure and mechanical properties of both the test specimens and gears made of Mn-alloyed ADI were investigated. The results showed that the mechanical property range of the isothermally quenched and tempered standard test specimens was as follows： σb=1000.4-1100MPa, δ=5.2%-6.8%; hardness=30-33 HRC, αk= 70-100 J/cm^2 （test with unnotched specimen） which has met the European Specification EN1564-97/EN-GJS-1000-5. After meshing engagement of gears the residual austenite in the surface layer of the teeth changed into martensite that obviously increased the hardness of the surface layer.

关 键 词：奥贝球铁 锰 显微组织 力学性能 齿轮 

分 类 号：TG255[金属学及工艺—铸造] TG143.5[一般工业技术—材料科学与工程]