Q235-A 钢带直流电阻对焊接头变形的研究  

Study of the Deformation of DC Upset Butt Welding on Q235 A Steel Strip

作　　者：吴丰顺[1,2] 王士元[1,2] 史耀武 董仕节[1,2] 孙守礼 孙智富[1,2] 

机构地区：[1]西安交通大学 [2]武汉汽车工业大学

出　　处：《武汉汽车工业大学学报》1997年第4期59-63,共5页

摘　　要：采用位移门槛电压控制焊接过程，对Ｑ２３５－Ａ钢进行了变压式和等压式扁钢带直流电阻对焊试验。其结果表明，增大位移门槛值或者减小预压力，可增大塑性金属的变形程度，这有利于将杂质从接合界面挤出。接头的“开花”现象是界面拉应力产生的。A displacement threshold was used to control DC upset butt welding process, and constant pressure and varied pressure tests were carried out on Q235 A steel strips. Experimental results show that the deformation of plastic metal may be increased by increasing the displacement threshold voltage or by decreasing initial pressure. This will benefit the expulsion of interfacial contaminant. The phenomena of cracking at both sides of the butt is caused by tension stress.

关 键 词：直流电阻对焊 门槛电压 焊接 试验 接头变形 

分 类 号：TG406[金属学及工艺—焊接]