AZ31B变形镁合金板坯的组织与性能研究  

Microstructure and properties of AZ31B wrought magnesium alloy slab

作　　者：张青来[1] 郭海玲[1] Bondarev A B Bondarev B I 韩伟东 周娅莉[4] 孙毓蔚[4] 

机构地区：[1]江苏大学材料科学与工程学院,江苏镇江212013 [2]Industrial Center MATEKS Ltd,Moscow Russia121596 [3]宝鸡搏信金属材料有限公司,陕西宝鸡721013 [4]宝鸡钛业股份有限公司,陕西宝鸡721014

出　　处：《金属热处理》2008年第7期24-28,共5页Heat Treatment of Metals

基　　金：国家自然科学基金(50774037);江苏大学项目(05JDG009)

摘　　要：采用半连铸法制备了AZ31B镁合金板坯,研究了化学成分、杂质含量及均匀化退火工艺对AZ31B变形镁合金板材组织和性能的影响,通过冲断试验对试验板坯的宏观断口进行了分析。结果表明,所制备AZ31B镁合金板坯中的Mn、Fe元素含量超标导致板坯出现粗大柱状晶以及金属间化合物等缺陷,因此该成分的板坯只适合轧制中厚度的板材。该合金板坯采用阶段均匀化退火制度(380℃×8h+420℃×6h),改一火多道次轧制工艺为多火多道次,可轧制出8mm厚板材,其力学性能达到相应标准要求。AZ31B magnesium alloy slab was prepared by semi-continuous casting. Influence of chemical components, impurities and homogenizing annealing process on microstructure and properties of AZ31B magnesium alloy plate was studied. The macroscopic fracture of the alloy slab was analysised by impact test. The results show that there are defects of large columnar grains and intermetallic compounds in the slab of AZ31B magnesium alloy when the volume fraction of Mn and Fe elements are higher than standard value. The plate with 8 mm in thickness can be obtained by stage homogenizing annealing（380 ℃× 8 h ＋ 420 ℃ × 6 h） and multiple-annealing multiple-rolling instead of single-annealing multiple-rolling, and the mechanical properties can fulfill the requirement of corresponding standard.

关 键 词：AZ31B变形镁合金 板坯 轧制 组织与性能 

分 类 号：TG146.22[一般工业技术—材料科学与工程]