磷酸盐基(苯乙烯-丁二烯-苯乙烯)嵌段共聚物离聚体的结构、性能及应用  

Structure,properties of phosphated (styrene-butadiene-styrene) block copolymer ionomer and its uses

作　　者：赵巍[1] 谢洪泉[2] 刘良炎[1] 佘万能[1] 

机构地区：[1]湖北省化学研究院,湖北武汉430074 [2]华中科技大学化学系,湖北武汉430074

出　　处：《合成橡胶工业》2008年第5期381-384,共4页China Synthetic Rubber Industry

摘　　要：由环氧化的苯乙烯-丁二烯-苯乙烯嵌段共聚物(SBS)与磷酸氢二钠通过开环反应制备了含磷酸二钠基的SBS离聚体(PSBS),研究了PSBS的形态结构、混炼胶力学性能的影响因素、PSBS/聚丙烯(PP)共混物的力学性能以及PSBS对SBS/氯醚橡胶(CHR)共混物的增容作用。结果表明,磷酸盐基SBS离聚体呈大小不一、形状不规则的离子微区;当硬脂酸锌用量为PSBS质量分数的10%、离子基团含量为0.95mmol/g时,PSBS混炼胶的力学性能最佳,且呈现热塑性弹性体行为;PSBS与PP共混,其拉伸强度与组成呈现协同效应,且耐甲苯性提高;PSBS可作为SBS/CHR共混物的增容剂,其最佳质量分数为3%,离聚体的加入有助于改善共混物的耐油性和相容性。Phosphated （styrene-butadiene-styrene） block copolymer（PSBS） ionomer was obtained by ring-opening reaction of epoxidized （styrene-butadiene-styrene） block copolymer（SBS） with Na2HPO4. The morphology structure of PSBS, the factors influencing on mechanical properties of PSBS and the mechanical properties of PSBS/polypropylene （PP） blend as well as its compatibilization for SBS/epichlorohydrin rubber （CHR） blends were studied. The results showed that PSBS exhibited irregular ionic domains. The mechanical properties of PSBS were better, and exhibited thermoplastic behavior, when mass fraction of zinc stearate in PSBS was 10%, ionic group content of PSBS was 0. 95 mmol/g. A synergistic effect with respect to tensile strength and enhanced toluene resistance occurred for the PSBS/PP blends. The oil resistance and compatibility of SBS/CHR blends were improved when PSBS used as compatibilzer and the mass fraction of PSBS was 3%.

关 键 词：离聚体 苯乙烯-丁二烯-苯乙烯嵌段共聚物 氯醚橡胶 聚丙烯 共混物 

分 类 号：TQ330.1[化学工程—橡胶工业]