检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:杨寅[1] 罗运军[1] 酒永斌[1] 杜美娜[1] 吕勇[1] 葛震[1]
机构地区:[1]北京理工大学材料科学与工程学院,北京100081
出 处:《固体火箭技术》2008年第4期358-362,373,共6页Journal of Solid Rocket Technology
基 金:装备预先研究项目(51328050302)
摘 要:采用热塑性聚氨酯弹性体,通过水-溶液悬浮法将其包覆于六硝基六氮杂异伍兹烷(CL-20),并对包覆后的CL-20分别进行了XPS、SEM、撞击感度和表面能测试;研究了弹性体包覆CL-20对含CL-20的NEPE推进剂常温力学性能、燃烧性能的影响。研究表明,热塑性弹性体能有效包覆CL-20,在大幅度提高含CL-20的NEPE推进剂常温力学性能并改善"脱湿"的同时,改善高能低特征信号配方燃烧性能,σm最大提高了47%,εm最大提高了184%;燃速压强指数n降低了12%.Thermoplastic polyurethane( TPU ) was coated on the hexanitrohexaazaisowurtzitane (CL-20) by means of water-solution suspension method. The coated CL-20 were tested by means of XPS, SEM, impact sensitivity and surface free energy measurement methods. The effects of the coated CL-20 on mechanical and combustion properties of NEPE propellant at room temperature were investigated. The results show that the coated CL-20 can greatly improve mechanical properties of NEPE propellant at room temperature as well as demoisture and combustion properties of high-energy low characteristic signal propellant; σm can maximally increase by 47% and εm can increase by 184% ,the pressure exponent n can decrease by 12%.
关 键 词:热塑性聚氨酯弹性体 六硝基六氮杂异伍兹烷(CL-20) NEPE推进剂
分 类 号:V512[航空宇航科学与技术—航空宇航推进理论与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.38