超高分子量聚乙烯/石墨包覆铜纳米粒子摩擦磨损性能  

Tribological Properties of UHMWPE/GECNP Composite

作　　者：薛俊[1] 唐浩奎[2] 林航升[2] 宾晓蓓[3] 曹宏[2] 

机构地区：[1]武汉材料保护研究所,武汉430030 [2]武汉工程大学材料科学与工程学院,武汉430073 [3]武汉理工大学资源与环境工程学院,武汉430070

出　　处：《材料导报》2008年第9期109-111,118,共4页Materials Reports

基　　金：湖北省自然科学基金资助项目(2004ABA090);武汉工程大学青年科学基金资助项目(q200804)

摘　　要：在超高分子量聚乙烯(UHMWPE)中填充石墨包覆铜纳米粒子(GECNP),利用扫描电子显微镜观察了复合材料的断面形貌,用XP销-盘摩擦磨损试验机研究了其摩擦磨损性能,并用铜粉(Copper)、纳米石墨粉(GNS)作对比添加剂进行了同等试验。结果表明,GECNP均匀分散在UHMWPE中,当线速度为0.25m.s-1,GECNP填充量不高于3%时,UHMWPE/GECNP复合材料与空白UHMWPE相比磨损率降低,摩擦系数保持不变,综合性能优于UHMWPE/Copper和UHMWPE/GNS。当GECNP填充量为1%时,磨损率最低,与空白样相比降低了53.9%,摩擦系数也略有降低。Graphite encapsulated copper nano-particles （GECNP） are filled in UHMWPE. The fractural face of composites with SEM is observed,and the friction and wear properties of three composite materials are researched by XP pin-on-disc friction and wear test machine. For contrast,copper and GNS are used to do experimental additive. The results indicate that GECNPs are distributed uniformly in UHMWPE; when the speed is 0. 25m· s^-1 and the quality content of GECNP is within 3%, the wear rate of UHMWPE/GECNP composite materials is reduced compared with the UHMWPE,and the friction coefficients are unchanged. The comprehensive performance is better than UHMWPE/ Copper and UHMWPE/GNS. When the quality content of GECNP is 1%, the wear rate is minimum, that is the wear rate of UHMWPE/GECNP composite materials is reduced 53. 9 % compared with the UHMWPE, and the friction coefficient is slightly lower.

关 键 词：石墨包覆铜纳米粒子 超高分子量聚乙烯(UHMWPE) 摩擦磨损性能 

分 类 号：TQ325.12[化学工程—合成树脂塑料工业]