刚性粒子协同增韧PP基复合材料的研究  

Study on Synergistic Toughening of PP Composite by PA6 and TiO_2

作　　者：王珏[1] 伍玉娇[1] 丁兴艳[1] 骆丁胜[1] 肖贤彬[1] 栗小帆[1] 

机构地区：[1]贵州大学材料科学与冶金工程学院

出　　处：《塑料工业》2008年第9期16-19,共4页China Plastics Industry

基　　金：国家863计划项目(2003AA32X230);贵州省自然科学基金项目(黔科合计2004(3045)号);贵州省工业攻关项目(黔科合GY字(2006)3013)资助

摘　　要：研究了有机刚性粒子PA6和无机刚性粒子纳米TiO2对PP基复合材料的协同增韧作用。通过力学性能测试,SEM和DSC分析,对PP基复合材料的微观结构和性能进行了系统的研究。研究结果表明:质量分数为8%的PA6和1%纳米TiO2对PP基复合材料有较好的协同效应。SEM分析得出复合材料PP/PA6/POE-g-MAH/纳米TiO2在断裂过程中发生塑性变形,其韧性较好。DSC分析得出PA6和纳米TiO2对PP基体均有异相成核作用。The synergistic toughening of PP composite by organic rigid PA6 particle and inorganic rigid nano- TiO2 particle was studied. The micro-structure and properties of the PP composite were studied by means of mechanical properties test, SEM and DSC. The results indicated when the mass fractions of PA6 and nano-TiO2 was 8 % and 1% respectively, the synergistic effect on PP composites was optimum. SEM analysis showed PP/PA6/ POE-g-MAH/nano-TiO2 had plastic deformation and better toughness during fracture process. DSC showed the addition of PA6 and nano-TiO2 into PP had an obvious nucleating effect on the crystallization of PP.

关 键 词：尼龙6 纳米TIO2 协同增韧 聚丙烯 

分 类 号：TQ325.14[化学工程—合成树脂塑料工业]