B2O3对低氟结晶器保护渣理化性能的影响  

Influence of B_2O_3 on Physico-Chemical Properties of Low Fluorine Mold Powder

作　　者：王艺慈[1] 郭俊玉[2] 董方[1] 赵文广[1] 

机构地区：[1]内蒙古科技大学材料与冶金学院,包头014010 [2]邯郸职业技术学院,邯郸056001

出　　处：《特殊钢》2008年第5期10-12,共3页Special Steel

基　　金：内蒙古自然科学基金资助项目(编号：200208020206)

摘　　要：研究了氟含量1.9%的保护渣系(%:27～30CaO、30～33SiO2、2～3Al_2O_3、2～3MgO、10～12R_2O、1～2Fe_2O_3、4～5C粉、2Li_2O、4CaF_2、0～8B_2O_3)的理化性能。结果表明:随着渣中B_2O_3含量的增加,保护渣熔点、析晶温度、粘度均降低,但B_2O_3含量超过6%以后,对保护渣牯度几乎没有影响;B_2O_3含量为2%～4%时,表面张力较低,有利于结晶器内钢液中夹杂物的上浮排除,得到洁净铸坯。The physico-chemical properties of the mold powder series containing 1.9% fluorine （27 - 30CaO, 30 - 33SiO2 , 2 -3A2O3 , 2 - 3MgO, 10 - 12R2O, 1 - 2Fe2O3 , 4 - 5C powder, 2Li2O, 4CaF2, 0 - 8B2O3 ） have been studied. Results showed that with increasing B2O3 content in powder, the melting point, crystallizing temperature and viscosity of mold powder decreased, but as B2O3 content was more than 6%, the viscosity of mold powder was not further decreased; and as B2O3 content was 2% -4%, the surface tensile force of mold powder was lower, it was available to float and remove inclusion from liquid steel in mold and get cleanliness casting slab.

关 键 词：B2O3 低氟结晶器保护渣 理化特性 

分 类 号：TF777[冶金工程—钢铁冶金] TQ174.43[化学工程—陶瓷工业]