基于ANSYS/LS-DYNA的焦面板残余应力分析  

A Finite Element Analysis of Residual Stress of Focal Plate on ANSYS/LS-DYNA

作　　者：王志勇[1] 王建平[1] 李晓锋[1] 朱丽君[1] 干方建[1] 陈海波[1] 

机构地区：[1]中国科学技术大学精密机械与精密仪器系,合肥230027

出　　处：《组合机床与自动化加工技术》2008年第9期33-36,共4页Modular Machine Tool & Automatic Manufacturing Technique

基　　金：国家九五重大科学工程项目(98BJG001);大天区面积多目标光纤光谱天文望远镜(LAMOST)项目

摘　　要：为研究残余应力的释放对焦面板的变形影响,建立三维斜角切削有限元模型,使用ANSYS/LS-DY-NA进行切削模拟,获得了已加工表面的残余应力分布,并研究不同切削深度下焦面板的变形大小。通过加工试验表明基于有限元的数值模拟方法可以有效预测焦面板的加工变形。To reveal the influence of residual stress releasing to the machining distortion of the LAM OST focus plate, the cutting process was simulated using the 3D oblique cutting finite element model by ANSYS/LSDYNA, The distribution on the surface residual stress was achieved, and the influences of cutting depths on the distortion of the focus plate was investigated. The result showed that the FEM analysis is an effective method predicting the machining distortion of the focus plate.

关 键 词：LAMOST 焦面板 ANSYS/LS-DYNA 切削 残余应力 有限元 

分 类 号：TG501[金属学及工艺—金属切削加工及机床] TB24[一般工业技术—工程设计测绘]