单偏振单模微结构聚合物光纤理论设计  

Theoretical Design of Single Polarization Single Mode Microstructured Polymer Optical Fibers

作　　者：张亚妮[1] 

机构地区：[1]宝鸡文理学院物理系

出　　处：《光子学报》2008年第9期1800-1804,共5页Acta Photonica Sinica

基　　金：国家自然科学基金重点项目(60437020);陕西省自然科学基础研究计划项目(2007A18);陕西省教育厅自然科学计划项目(08JK214);宝鸡市科技攻关项目(07KG04-2);宝鸡文理学院重点项目(Zk0699)资助

摘　　要：采用全矢量有限元法并结合完美匹配边界条件,得到了一种新型结构的单偏振单模微结构光纤,以聚合物聚甲基丙烯酸甲酯为基材,对其偏振模场、快轴模和慢轴模截至波长和约束损耗进行了研究.结果发现,通过改变光纤结构参量,可以使光纤基模两个正交偏振态截止波长不同,光纤中只能传输基模的一个偏振态(慢轴模).若调整光纤单偏振单模工作区在聚合物光纤通信窗口650nm附近,该光纤传输慢轴模的约束损耗低于0.05dB/m.A new structure of single polarization single mode （SPSM） microstructured polymer optical fibers （MPOFs） is proposed and numerically analyzed by using a full vector finite element method with anisotropic perfectly matched layers. The polarization mode fields, the cutoff wavelength of fast-axis modes and slows-axis modes, and the confinement loss were theoretically studied based on polymethyl methacrylate （PMMA）. From the numerical results, it is confirmed that the cutoff wavelength of twoorthogonal polarized states can be adjusted by varying the structure parameters of the proposed fibers, and one polarized states of fundamental mode （slow-axis mode） is transmitted only. If the wavelength region of SPSM is tuned at communication wavelength of polymer optical fiber （POF） of 650 nm, the confinement loss of slow-axis mode was less than 0.05 dB/m.

关 键 词：导波与光纤光学 微结构聚合物光纤 单偏振单模 有限元法 约束损耗 

分 类 号：TN929.11[电子电信—通信与信息系统]