机场跑道接缝密封材料工艺设计和施工工艺  

Process design and construction technology of airport runway joint sealant

作　　者：蔺艳琴[1] 刘嘉[1] 曹寿德[1] 潘广萍[1] 

机构地区：[1]北京航空材料研究院,北京100095

出　　处：《中国建筑防水》2008年第9期22-25,共4页China Building Waterproofing

摘　　要：通过对自流平型HM199室温硫化密封胶灌注工艺性能的研究,提出用于机场跑道时密封胶的灌注深度与接缝宽度的最佳比为1:2,灌注深度最小不低于6.4mm,最大不超过12.7mm,密封胶顶部与道面的距离宜为3～7mm。By studying pouring process of self-leveled HM199 room temperature sulfurized sealant, this paper puts forward that the optimal ratio of pouring depth to joint width of airport runway sealant is 1：2, pouring depth should be more than 6.4 mm but less than 12.7 mm, and the distance between top of sealant and runway surface is 3-7 mm.

关 键 词：机场跑道 接缝 密封胶 施工 

分 类 号：U414[交通运输工程—道路与铁道工程]