压力下挤压铸造Al-Cu合金的性能研究  

Microstructure and Properties of Squeeze Cast Al-Cu Alloy under Pressure

作　　者：李彦霞[1] 

机构地区：[1]广东白云学院,广东广州510450

出　　处：《机电工程技术》2008年第8期67-69,共3页Mechanical & Electrical Engineering Technology

基　　金：国家863计划项目(编号:2003AA305420)

摘　　要：使用挤压铸造工艺制备出一种新型高强韧Al-Cu合金,75Mpa挤压力T5热处理状态下其抗拉强度和延伸率分别达到490MPa和9.8%,比同条件下无压力时分别提高71.9%和50%。对该合金力学性能及其显微组织进行分析,结果表明,Al-Cu合金的抗拉强度和延伸率均随压力的增加而增大;加压之后晶粒明显细化,枝晶间距减小。Squeeze casting process is used to produce a new high strength and high toughness Al-Cu alloy. The alloy in T5 heat-treated condition is 490MPa in ultimate tensile strength with a rise 71.9% and 9.8% in elongation with a rise 50% under 75MPa pressure. Microstructure and mechanical property of the alloyare examined in the as-cast and heat-treated conditions to determine theeffect of the squeeze pressure. Results show that the ultimate tensile strength, the elongation of the as-cast and the heat-treated castings increase with the applied pressure. The grain size and the dendrite arm spacing decrease with the increase of applied pressure.

关 键 词：挤压铸造 铝铜合金 力学性能 显微组织 

分 类 号：TG283[金属学及工艺—铸造]