检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李成芳[1] 吴德伦[1] 邓小波[2] 王定春[2]
机构地区:[1]重庆大学土木工程学院,重庆400010 [2]重庆市建筑科学研究院,重庆400015
出 处:《岩土力学》2008年第9期2561-2566,共6页Rock and Soil Mechanics
基 金:重庆市建设科技研究项目(城科字2002第22号)
摘 要:通过一高层建筑桩箱基础原位测试,阐述了箱基底板钢筋应力变化特征、基础变形和沉降规律、箱底土压力分布规律及桩-土荷载分担比例。测试结果表明,箱基底板钢筋应力仅为设计强度的8%;基础沉降量为理论计算值的20%;基础纵向弯曲值仅为0.319‰,设计时可只考虑局部弯曲而不考虑整体弯曲;箱基底板土分担了11%的荷载,土压力没有得到充分发挥,建议增大桩距来实现这一目的,从而降低工程造价。Based on the in-situ test of pile-box foundation for a tall building, variation charateristics of box foundation, including steel stress of base slab, deformation and settlement of foundation, earth pressure under box, and load sharing ratio between pile and box, etc. are described. The results indicate that the steel stress of base slab is only 8% of its design strength; and settlement of foundation is only 20% of the theoretical calculaed value. Overall flexure value of foundation is only 0.319 ‰; so local flexure is main influence factor on base slab. Soil can only share 11% of the load above and the contact pressure is very small comparing with its resistance capacity. In order to improve earth pressure under box and reduce construction cost, enlarging interals of piles is an effective way.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.144.165.245