检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:童志怡[1] 陈从新[1] 徐健[2] 张高朝[2] 路为[3]
机构地区:[1]中国科学院武汉岩土力学研究所 [2]湖北沪蓉西高速公路建设指挥部,湖北恩施445000 [3]交通部公路科学研究院,北京100088
出 处:《岩土工程学报》2008年第9期1367-1371,共5页Chinese Journal of Geotechnical Engineering
摘 要:运用黏着摩擦理论,分析结构面直剪过程中实际剪切面积的变化规律及其对剪切应力的影响,认为实际接触面积的最大点对应于结构面的剪切破坏状态,由此通过对试验过程的分析给出了剪切破坏的简易判别式,在此基础上提出抗剪强度选取的新方法。运用此方法对沪蓉西高速公路24标段岩体结构面的抗剪强度进行了选取,其选取结果与峰值强度折减后的结果比较接近,且该方法比峰值强度的折减系数选取更合理可靠。The adhesion friction theory was applied to study the variation of shear area of structural plane and its influence on shear stress. The shearing failure of structural plane was considered to correspond to the maximum of real contact area. A criterion was given to distinguish the shearing failure of structural plane and a new selecting method of shear strength was brought forward subsequently. This method was applied in the direct shear tests on structural plane from the 24th section of Hurongxi Highway in Hubei Province to select the shear strength. The selected result was approximately the peak strength after multiplying a reduction factor, but the proposed method was more reasonable and more convenient than selecting a reduction factor for the peak strength.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.218.117.14