造纸厂废水处理工程改造  

Reconstruction of Wastewater Treatment Project of Paper Making Factory

作　　者：冯兴华[1] 王现丽[1] 时鹏辉[1] 

机构地区：[1]平顶山工学院环境工程系,河南平顶山467044

出　　处：《中国给水排水》2008年第18期28-29,共2页China Water & Wastewater

摘　　要：某造纸厂废水处理采用收浆/调节池/超效浅层气浮工艺,出水水质不达标。在原有工艺的基础上增加接触氧化池后的运行结果表明:采用该工艺处理造纸废水,出水水质可达到《造纸工业水污染物排放标准》(GB 3544—2001)。The paper pulp collection/equalizing tank/super-efficient shallow air floatation processes were used for wastewater treatment in a paper making factory, and the effluent quality did not reach the national discharge standard. Therefore, the contact oxidation tank was added on the basis of the original processes. The operating results show that the effluent quality after the reconstruction reaches the Discharge Standard of Water Pollutants for Paper Industry （GB 3544 -2001）.

关 键 词：造纸废水 工程改造 接触氧化 

分 类 号：X703.1[环境科学与工程—环境工程]