检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]西安建筑科技大学西建大-莱钢钢结构研发中心,西安710055 [2]山东莱钢建设有限公司,山东青岛266071
出 处:《建筑科学》2008年第9期23-27,9,共6页Building Science
基 金:陕西省自然科学基金(2007E202);西安建筑科技大学青年基金(QN0701)
摘 要:对三个穿芯螺栓—端板连接节点进行了伪静力试验研究,研究了不同轴压比时节点的滞回性能、强度和刚度退化、延性、耗能性能及破坏特征。结果表明,试件的层间位移延性系数为2.38-2.45,弹性及弹塑性层间位移角分别为0.0140-0.0158rad、0.0341-0.0377rad,能量耗散系数为2.567-3.820。所有节点试件均为梁端形成塑性铰而破坏,节点具有较好的强度、刚度、延性和耗能能力。提出了相关的设计及研究建议。A total of three experimental specimens of through-column bolted end plate connections consisting of concrete-filled square steel tube column and H-shaped beams were tested under the low-cyclic reversed loading to research the hysteric behavior, the strength and stiffness degradation, the energy dissipation capacity and the failure modes. The only difference of all specimens is the axial compression ratio. Experimental results show that the story drift ductility ratios are 2.38 - 2.45, the elastic and elasto-plastic story angular drift are 0.0140 - 0.0158rad and 0.0341 -0.0377rad respectively, and the energy dissipation ratios are 2. 561 - 3. 820. The experimental results demonstrate that all specimens can develop plastic hinges at the end of beams and provided good seismic resistance in strength, stiffness, ductility and energy dissipation capacity, Additional a seismic design and research recommendations are presented.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.249