紫铜表层Fe-Al共渗工艺研究  

Research on the permeation technology of Fe-Al on the red copper surface

作　　者：王国凡[1] 汤爱君[1] 罗辉[1] 苗磊[1] 王萌萌[1] 

机构地区：[1]山东建筑大学材料学院,山东济南250101

出　　处：《兵器材料科学与工程》2008年第1期10-13,共4页Ordnance Material Science and Engineering

基　　金：山东省自然科学基金资助项目(Y2005F18)

摘　　要：利用固体法Fe-Al共渗工艺,对紫铜表层进行强化处理。用JSM-6380LA型扫描电镜J、ED-2300能谱仪和HMV显微硬度计分析渗层的组织形态、成分和显微硬度,用MLD-10型动载磨料磨损试验机对三种试样进行耐磨性试验,结果表明:在塑性好的α1或α1+(α2+γ2)亚共析组织基体上,均匀分布有Fe、Al共渗的(α2+γ2)共析相,其耐磨性好于单渗Al和未渗的试样。随着加热温度的升高、保温时间的增长,渗层越深。This paper studied the strengthening treatment on the red copper surface using the solid method of Fe-Al permeation technology.With the JSM-6380LA scanning electron microscope,JED-2300 energy spectrometer and HMV microhardness instrument,the paper analysed the structure of permeating layer,the distribution of the component and the value of microhardness.With the MLD-10 testing machine of dynamic loading grinding abrasion,wear resistance experiments were done.The results shown that the（α2＋β2）eutectoid phases of Fe-Al permeation uniformly distributed on the basal body of good plasticity α1 or（α2＋β2） hypoeutectoid,the wear resistance of which was better than that of test sample of Fe permeation and un-permeation.The higher the heating temperature and longer holding time,the deeper the permeating layer.

关 键 词：紫铜 固体法 铁铝共渗 工艺 

分 类 号：TG174.445[金属学及工艺—金属表面处理]