大型饼类锻件镦挤工艺应变场的数值模拟  

Numerical simulation of strain field for upsetting-extruding process for heavy disk-shaped forgings

作　　者：张莉萍[1] 于锁清[1] 倪利勇[2] 林正英[3] 

机构地区：[1]邢台职业技术学院机电系,邢台054035 [2]广东海洋大学工程学院,湛江524088 [3]同济大学机械工程学院,上海200092

出　　处：《机械设计与制造》2008年第10期200-201,共2页Machinery Design & Manufacture

基　　金：广东海洋大学博士科研基金(0612165)

摘　　要：研究发现,在镦挤过程中,坯料中心出现上下两个刚性区。当压下量较小时,上刚性区较大,随着镦挤过程的进行,上刚性区逐渐减小,并与下刚性区靠近。对比平板镦粗和漏盘镦挤来看,平板镦粗过程中坯料心部的金属产生的等效应变比漏盘镦挤剧烈。Results show that there are two rigid zones in the billet during the upsetting-extruding. The upper rigid zone is larger than the lower one when the reduction is small. The upper rigid zone decreases and approaches the lower one as the upsetting-extruding goes. The comparison of the upsettingextruding and the fiat plates upsetting shows that there is more intense equivalent strain in the heart of thebillet metal during the fiat plates upsetting than that during the upsetting-extruding.

关 键 词：镦挤 大型锻件 有限元 数值模拟 

分 类 号：TG316[金属学及工艺—金属压力加工]