凸条格提花织物的开发  

Weaving Processing Discussion of Check Jacquard Fabric

作　　者：郝广禄[1] 耿庆兰[1] 郑明芬[1] 王洪章[1] 刘洪霞[1] 

机构地区：[1]山东德棉股份有限公司

出　　处：《棉纺织技术》2008年第10期31-33,共3页Cotton Textile Technology

摘　　要：探讨在JAT610-280型喷气织机上生产凸条格提花织物的技术措施。通过分析凸条格提花织物的特点,提出在单织轴喷气织机上采用大小织轴搭配的方法;通过分析产生松紧经疵点和经纱断头率高的原因,提出分别调节大小织轴张力的方法。通过优化织机上机工艺参数和采取相关技术措施,使入库一等品率达到96.2%以上。Technological measures of producing check jacquard fabric in JAT610-280 air-jet loom were discussed. Through analysing property of check jacquard fabric, method of arranging larger loom beam with smaller loom beam in single beam air-jet loom was put out. Through analysing the causes of elastic warp defects and high warp breakage, method of adjusting larger and smaller loom beam tension respectively was put out. Through optimizing loom processing parameter and adopting relative technological measures first grade products that put in storage reach above 96.2%.

关 键 词：凸条格 提花织物 织轴 后梁 开口时间 经纱张力 

分 类 号：TS105[轻工技术与工程—纺织工程]