废旧PS泡沫微波法制备对硝基苯甲酸工艺  

Preparation Technics of p-Nitrobenzoic Acid From Waste Polystyrene Foam by Microwave

作　　者：王浩绮[1] 阮文辉[1] 韦萍[1] 曹飞[1] 

机构地区：[1]南京工业大学制药与生命科学学院,江苏南京210009

出　　处：《现代塑料加工应用》2008年第5期8-11,共4页Modern Plastics Processing and Applications

基　　金：国家自然科学基金资助项目(20576054);国家高新技术研究发展计划(863);基金资助项目(2006AA022235)。

摘　　要：用废旧聚苯乙烯泡沫为原料,通过微波反应器制备对硝基苯甲酸,探讨了影响对硝基苯甲酸产率的因素,如硝酸的质量浓度和用量、反应压力和时间、微波反应器功率、催化剂用量等。结果表明,在反应压力2.0 MPa、反应温度200℃、反应时间60 min、硝酸的质量浓度68 g/mL、微波反应器功率1 200 W、硝酸与对硝基聚苯乙烯的质量比5.0:1.0、催化剂用量为对硝基聚苯乙烯质量的0.1%的最优条件下,对硝基苯甲酸的产率可达85%,产品纯度为99.4%。The preparation of ρ-nitrobenzoic acid from waste polystyrene foam by microwave reactor was studied. The effect factors such as mass concentration and dosage of nitric acid, reaction pressure, reaction time, the power of microwave reactor and catalyst dosage on yield of ρ-nitrobenzoic acid were investigated. The results show that the yield and purity of ρ-nitrobenzoic acid are 85% and 99.4% respectively when reaction pressure is 2.0 MPa, reaction temperature is 200℃. reaction time is 60 min, mass concentration of nitric acid is 68 g/mL, power of microwave reactor is 1 200 W. mass ratio of nitric acid to ρ-nitro polystyrene is 5.0 ： 1.0 and mass of catalyst is 0.1 % of mass of p-nitro polystyrene.

关 键 词：废旧泡沫 聚苯乙烯 对硝基苯甲酸 微波 

分 类 号：TQ246.1[化学工程—有机化工]