结晶器冷却强度对铸坯初始凝固均匀性的影响  

Influence of mould cooling intensity on the strand shell homogeneity in the initial solidification areas

作　　者：程常桂[1] 王超[1] 陈灿[1] 于学斌[1] 

机构地区：[1]武汉科技大学钢铁冶金及资源利用省部共建教育部重点实验室,湖北武汉430081

出　　处：《武汉科技大学学报》2008年第5期491-495,共5页Journal of Wuhan University of Science and Technology

基　　金：湖北省教育厅科学研究资助项目(2004D2007)

摘　　要：通过建立结晶器二维非稳态传热模型,在考虑气隙及角部圆弧对铸坯凝固过程影响的基础上,研究结晶器冷却强度对铸坯初始凝固均匀性影响的规律。结果表明,在结晶器内初始凝固区域,铸坯近角部的坯壳厚度小于角部和表面中心处的坯壳厚度;结晶器冷却强度降低,坯壳厚度变薄,但周向均匀性得到改善。Through the two-dimensional unsteady heat transfer model for mould, the paper has studied the influence of mould cooling intensity on the strand shell homogeneity in the initial solidification areas with the influences of gas gap and corner arc in mould considered. The model calculation shows that the shell thickness near the corner is smaller than that of corner and surface center in the initial solidification areas; when the mould cooling intensity is reduced, the strand shell becomes thinner while the circumferential uniformity of shell thickness is improved.

关 键 词：结晶器 冷却强度 初始凝固 均匀性 

分 类 号：TF777.2[冶金工程—钢铁冶金]