电泳沉积用BaTiO_3悬浮液的制备  

Preparation of stable BaTiO_3 aqueous suspension for electrophoretic deposition

作　　者：徐明[1] 刘云飞[1] 施书哲[1] 吕忆农[1] 

机构地区：[1]南京工业大学材料科学与工程学院材料化学工程国家重点实验室,江苏南京210009

出　　处：《南京工业大学学报（自然科学版）》2008年第5期43-47,共5页Journal of Nanjing Tech University(Natural Science Edition)

基　　金：南京工业大学博士学位论文创新基金资助项目(BSCX200704);江苏省省级环保科技项目

摘　　要：为了制备适合电泳沉积用的稳定悬浮液,在BaTiO3水基悬浮液中添加聚环氧琥珀酸(PESA)和一聚丙烯酸(PAA)基复合分散剂(TH-904).对BaTiO3水基悬浮液进行Zeta电位测试和粒度测试,研究了2种分散剂对Ba-TiO3分散性能的影响.仅仅通过调节悬浮液的pH不能得到适合电泳沉积用的稳定的BaTiO3悬浮液;而在pH为10.3时添加质量分数为1.5%的PESA或在pH为11.3时添加质量分数为0.3%的TH-904就能获得稳定的BaTiO3悬浮液.结合电泳沉积对悬浮液电导率的要求,选用PESA来制备电泳沉积用的稳定的BaTiO3悬浮液.A polyepoxysuccinic acid （PESA） and a complex polyacrylic acid （PAA） based dispersant were used as dispersants to prepare the stable aqueous suspension for electrophoretic deposition. Zeta potential and particle size were tested to study the dispersing effect of the dispersants on barium titanate water suspension. The stable BaTiO3 suspension for electrophoretic deposition could not be obtained by only adjusting the pH of the suspension. BaTiO3 particles were well dispersed in water using 1.5% （in mass percent） PESA as a dispersant at pH -10. 3 or 0.3% （ in mass percent） TH-904 as a dispersant at pH = 11.3. Regarding the requirement of electrophoretic deposition for the conductivity of the suspension, PESA was suitable dispersant to prepare the stable BaTiO3 suspension for electrophoretic deposition.

关 键 词：BATIO3 稳定性 电泳沉积 

分 类 号：TQ174[化学工程—陶瓷工业]