TSA-PANI/凹凸棒土纳米复合材料导电性能的研究和结构表征  

Study on conductivity and structural characterization of TSA doping polyaniline/attapulgite nanocomposites

作　　者：曾永斌[1] 姚超[1] 丁永红[1] 李效棠[2] 刘建平[3] 

机构地区：[1]江苏工业学院化工系,江苏常州213164 [2]江苏省凹土工程技术研究中心,江苏盱眙211700 [3]江苏南大紫金科技集团有限公司,江苏常州213016

出　　处：《化工矿物与加工》2008年第11期20-24,共5页Industrial Minerals & Processing

基　　金：国家863项目(2007AA06Z118);江苏省科技攻关(No.BE2006373;No.BE2006045);江苏省博士后基金(No.0602020B);常州市科技攻关(No.CE2007075)资助项目

摘　　要：采用原位聚合法在凹凸棒土(ATP)的表面包覆上对甲苯磺酸(TSA)掺杂的聚苯胺(PANI),合成了TSA-PANI/ATP纳米复合材料,研究了聚合温度、苯胺包覆率、聚合时间和过硫酸铵(APS)用量对复合材料体积电阻率的影响。结果表明:在m(APS)∶m(An)∶m(ATP)∶m(TSA)=2.45∶1∶3.33∶7.93,聚合温度为20℃,聚合时间为4h的条件下,复合材料的体积电阻率可达7Ω.cm。并通过TG-DTA、XRD、FTIR对该条件下制备的纳米复合材料进行了表征。The surface of attapulgite（ATP） was encapsulated with the polyaniline（PANI） doped with p-Toluene sulphonic acid（TSA） to synthesize the TSA-PANI/ATP nanocomposites by in situ poly-merization method. The effect of polymerization temperature, covering ratio of aniline, polymerization time and amount of ammonium persulfate（APS） on the volume resistivity were studied. The result indicated that when mass ratio of APS, An, ATP and TSA was 2.45 ： 1 ： 3.33 ： 7.93, polymerization temperature was 20℃, polymerization time 4hrs, the volume resistivity of nanocomposite could reach 7＆cm. Nanocomposites prepared on this condition were also characterized by TG-DTA, XRD and FTIR.

关 键 词：聚苯胺 凹凸棒土 对甲苯磺酸 纳米复合材料 

分 类 号：TD985[矿业工程—选矿]